Aircraft Control Panels

McMurdo Aviation Control Panels

Unless your ELT is mounted in a position where the switch and light can be seen and operated from the pilot’s normal seated position, a remote control panel is required to be installed in the instrument panels.

All Kannad Aviation remote control panels have a switch with three positions. Armed (ready for use when activated by the automatic switch), ON (activates immediately), and Test/RESET.

RC800

  • Specially designed for AIRBUS A380 aircraft, but compatible also with the single aisle A318, A319, A320, A321, and the long range: A330, A340, the RC800 illustrates Kannad’s dedication to giving the customer what the customer wants. This model is in Airbus colours and features a recessed switch.
  • Grey-Blue front panel with white markings and backlight
  • Amber LED operates as the ELT LED
  • Chromaticity / Brightness: compliant with ABD0023
  • Internal buzzer warns the pilot of an activation
  • Output to drive an external annunciator or horn (up to 1A @ 28V)
  • Weight: 225g
  • Front plate dimensions: 146 x 38mm
  • Depth (behind front panel): 89mm

RC300

This is the entry-level panel for DZUS rail mounting. Featuring a black front panel with white lettering and amber LED, it requires 4 or 5 AWG24 wires to connect to the ELT.

It also has an internal buzzer warns the pilot of an activation and there is an output to drive an external buzzer if required.

Weight: 120g
Dimensions : 146 x 63.5 x 38.1mm

RC600-NVG

Designed specifically for the Eurocopter Tiger, the RC600-NVG is just one example of a range of custom-designed remote control panels for DZUS rail mounting.

Features:

  • Black front panel with yellow fluorescent markings
  • NVG-compatible Amber LED operates as the ELT LED
  • Internal buzzer warns the pilot of an activation
  • Two Outputs to drive an external annunciator and/or horn (up to 1A @ 28V), Weight: 235g, Front plate dimensions: 146 x 38mm

RC200

Our most popular 3-wire Remote Control for GA aircraft, the RC200 is simple to install. Connection to the wiring loom is with a SUB-D9 connector, supplied as standard when you purchase the ELT KIT.

  • Weight: 50g.
  • The RC200 is the same dimmensions as the Artex remote control, making retro-fitting very straightforward.
  • Dimensions : 33 x 50 x 43mm
  • 3-position red switch (ON, ARMED, TEST/RESET)
  • D-SUB 9 pin connector with threaded locking device (UNC 4-40)
  • Output to drive an external buzzer
  • Output to control an external horn or annunciator (up to 1A)
  • Optionally, the RC200 is available in NVG-compatible format.

RC102

This 2-wire Remote Control panel kit is ideal when retro-fitting, as it is compatible with legacy ACK and AmeriKing 2-wire installations, with the same overall size and cut-out dimmensions. It is not necessary to replace the pre-existing wiring. The kit includes toggle switch + PCB, LED mounting, a choice of 2 LEDs (standard LED and NVG LED) and a choice of 2 front plates.

Can be installed directly on the instrument panel or with other remote controls (CVR, FDR…) on a remote control unit.

The kit can be mounted in the shop and installed aboard the aircraft from the back of the panel.

RC100

This 3-wire Remote Control is provided in kit form, to assemble on the aircraft, and is particularly suited to installations where minimal space is available.

The panel can be installed directly on the instrument panel or with other remote controls (CVR, FDR…) on a remote control unit.

The kit can be mounted in the shop and installed aboard the aircraft from the back of the panel.

Product Gallery:

To find your closest dealer please go to our where to buy directory
Where to Buy >